Why your BIOS matters and when to update it

Your BIOS (Basic Input/Output System) is the firmware that runs before your operating system loads — it's the bridge between your hardware and Windows or macOS. Most people never need to update it, but manufacturers release BIOS updates to fix security vulnerabilities, improve hardware compatibility, or resolve specific problems with your motherboard. If your computer is running fine and you have no known issues, you probably don't need to update. If you're experiencing crashes, your new hardware isn't recognized, or you've read about a security fix that affects your exact motherboard model, then checking for an update makes sense.

The risk of a BIOS update is real but small: a failed update can leave your computer unable to start. This is rare with modern computers, but it's why you should only update if you have a reason to, and why you need a stable power supply while the update runs. Never update during a thunderstorm or on a laptop running on battery.

Key Takeaways

  • Find your motherboard model by opening System Information on Windows (search "msinfo32") or About This Mac on macOS, then look for "System Model" or "Board Product."
  • Visit your motherboard manufacturer's support page directly — search "[your model number] BIOS read" — and check the release notes to see if the update addresses a problem you're experiencing.
  • read the BIOS file to a USB flash drive formatted as FAT32, then restart your computer and enter the BIOS setup menu (usually by pressing Delete, F2, or F12 during startup).
  • Use the BIOS menu's built-in flash utility to select and install the update file from the USB drive, then let the computer restart and complete the process without interruption.
  • Back up your current BIOS settings before updating in case you need to restore them, though most updates preserve your settings automatically.

Finding your motherboard model and manufacturer

Before you can find a BIOS update, you need to know which motherboard you have. On Windows, search for "msinfo32" in the Start menu and open System Information. Look for the line labeled "System Model" or "BaseBoard Product" — this is your motherboard model number. Write it down exactly as it appears.

On macOS, click the Apple menu, select "About This Mac," then click "System Report." Look for "Model Identifier" or "Board ID" in the Hardware section. If you see something like "MacBookPro15,1," that's your identifier. For iMac or Mac mini, the identifier tells you which generation you have.

If you built your own PC and installed the motherboard yourself, you may have the manual or the box it came in — the model number is usually printed on the motherboard itself near the CPU socket, though reading it requires opening the case. If you're uncomfortable opening your computer, the System Information route is safer and usually gives you what you need.

Locating the manufacturer's BIOS read page

Once you have your model number, search for "[your model number] BIOS read" in a search engine. You should land on the manufacturer's official support page — common manufacturers are ASUS, MSI, Gigabyte, ASRock, Intel, and Lenovo. Avoid third-party sites that claim to host BIOS files; always read directly from the manufacturer.

On the manufacturer's page, look for a "Downloads," "Support," or "Drivers & Tools" section. You'll see a list of BIOS versions with dates and file sizes. Read the release notes for each version — they explain what each update fixes. If the notes mention a problem you're experiencing (like "fixes USB 3.0 detection" or "patches security vulnerability CVE-2024-XXXXX"), that's your signal to update. If the notes don't mention anything relevant to you, skip the update.

read the latest BIOS file to your computer. The file will be a .bin, .rom, or .exe file, usually between 2 and 20 megabytes. Keep track of where you saved it — your Downloads folder is fine for now.

Preparing a USB drive and transferring the BIOS file

You need a USB flash drive to carry the BIOS file into your computer's BIOS menu. Any drive will work, but it must be formatted as FAT32, which is an older file system that BIOS menus can read reliably. Most USB drives come formatted as NTFS or exFAT, so you'll need to reformat it.

On Windows, plug in the USB drive, open File Explorer, right-click the drive, and select "Format." Choose "FAT32" from the "File system" dropdown, give it a straightforward name like "BIOS," and click Start. On macOS, open Disk Utility, select the USB drive, click "Erase," choose "MS-DOS (FAT)" from the format menu, and click Erase. Warning: formatting erases everything on the drive, so make sure it's empty or that you don't need what's on it.

Once the drive is formatted, copy the BIOS file you downloaded onto the USB drive. You can put it in the root folder (the main level) or in a folder — either works. Safely eject the USB drive when the copy is complete.

Entering BIOS setup and locating the flash utility

Restart your computer and watch the screen carefully during startup. You'll see a message that says something like "Press Delete to enter Setup" or "Press F2 for BIOS Setup." The key varies by manufacturer — common ones are Delete, F2, F10, and F12. Press that key repeatedly as soon as you see the message. If you miss it, the computer will boot normally into Windows or macOS; just restart and try again.

Once you're in the BIOS menu, you'll see a text-based interface with options like "Main," "Advanced," "Boot," and "Exit." Look for an option called "Save & Exit," "Tool," "Utilities," or "Flash BIOS" — the exact name depends on your manufacturer. This is where the flash utility lives. Use the arrow keys to navigate and Enter to select. Some BIOS menus also have a dedicated "Flash" or "Update" option in the main menu.

If you can't find a flash utility, check your motherboard manual or the manufacturer's website for instructions specific to your model. Some older boards require you to use a DOS-based flash tool from a USB drive instead of a built-in utility, which is more complicated but follows the same basic steps.

Running the BIOS update safely

Once you've opened the flash utility, it will ask you to select a file. Navigate to your USB drive and select the BIOS file you copied earlier. The utility will show you the current BIOS version and the new version you're about to install — double-check that the new version is actually newer. Then confirm the update.

The update process usually takes 2 to 5 minutes. Your screen may go blank or show a progress bar. Do not turn off the computer, unplug it, or press any keys during this time. A failed update can happen if power is lost or if the process is interrupted. If you're on a laptop, plug it in to AC power first. If you're on a desktop, consider plugging it into an uninterruptible power supply (UPS) if you have one, though this is not required for most updates.

When the update completes, the computer will restart automatically. It may take longer than usual to boot the first time. Once Windows or macOS loads, your BIOS has been updated successfully. You can verify this by opening System Information again and checking the BIOS version — it should match the version you just installed.

What to do if something goes wrong

If your computer fails to start after a BIOS update, don't panic. Most modern motherboards have a backup BIOS chip or a recovery mode. Restart the computer and look for a message about "BIOS Recovery" or "Backup BIOS." Follow the on-screen instructions, which usually involve inserting the USB drive with the BIOS file and pressing a specific key combination. If you see no recovery message, consult your motherboard manual or contact the manufacturer's support line — they can walk you through recovery steps specific to your model.

If the update completed but your computer behaves differently — slower, crashes more often, or hardware stops working — the BIOS update may have changed a setting. Restart, enter BIOS setup again, and look for a "Load Defaults" or "Reset to Default" option. This restores factory settings and often fixes unexpected behavior. If problems persist, you can usually roll back to the previous BIOS version by repeating the update process with the older BIOS file, though this is rarely necessary.

Frequently Asked Questions

How do I know if I actually need a BIOS update?

You need one only if you're experiencing a specific problem that the release notes mention, or if a security advisory affects your motherboard model. If your computer is stable and all your hardware works, updating is optional. Read the release notes before downloading — if they don't describe a problem you have, skip the update.

Can I update BIOS from within Windows instead of using the BIOS menu?

Some manufacturers offer Windows-based BIOS update tools that you can run from your desktop. These are convenient but riskier because Windows can be interrupted by updates or crashes. The BIOS menu method is safer because nothing else is running. If your manufacturer offers a Windows tool, use it only if you're confident your power supply is stable.

What if my USB drive won't show up in the BIOS flash utility?

Make sure the drive is formatted as FAT32, not NTFS or exFAT. Some older BIOS menus don't recognize newer file systems. Reformat the drive, copy the BIOS file again, and try a different USB port on your motherboard — some ports are faster and more reliable than others. If it still doesn't work, try a different USB drive.

Is it safe to update BIOS on a laptop?

Yes, but plug it into AC power first and don't unplug it during the update. Laptops are more vulnerable to power loss during updates because the battery can drain unexpectedly. Some laptop manufacturers also offer BIOS updates through Windows Update, which is convenient and safe — check your manufacturer's support page to see if that option is available.

Will a BIOS update erase my files or settings?

No. A BIOS update affects only the firmware on your motherboard, not your hard drive or the files stored there. Your Windows or macOS installation, documents, photos, and programs all remain unchanged. Your BIOS settings (like boot order or fan speed) usually stay the same too, though some updates may reset them to defaults.