What boot order is and why you might need to change it

Boot order is the sequence your computer checks for an operating system when it starts up. By default, it looks at your main hard drive first. If you want to install Windows from a USB drive, run a diagnostic tool, or boot from an external drive, you need to change this order so the computer looks at that device before the hard drive.

The BIOS (Basic Input/Output System) is the firmware that runs before Windows or any other operating system loads. It controls hardware settings, including which device the computer tries to boot from first. Changing boot order in BIOS is a straightforward process, but the exact steps depend on your computer's manufacturer.

You do not need special software or technical knowledge beyond knowing how to restart your computer and press a key at the right moment. The change is temporary unless you save it, and you can always change it back.

Key Takeaways

  • Boot order determines which device your computer checks first for an operating system when it starts, and you change it in BIOS, not Windows.
  • You enter BIOS by restarting your computer and pressing a specific key (usually Delete, F2, F10, or F12) when ready after it powers on, before Windows loads.
  • The key you need depends on your computer's manufacturer: Dell uses F2, HP and Lenovo often use F10, Asus uses Delete, and Microsoft Surface uses F12.
  • Once in BIOS, you navigate to the Boot menu using arrow keys, select your USB drive or other device, and move it to the top of the list.
  • After you save and exit BIOS, your computer will boot from the new device on the next restart, and you can change it back anytime.

How to enter BIOS on your computer

Entering BIOS requires you to press a key during the startup process, before Windows loads. Restart your computer and watch the screen carefully as it powers on. You will see a brief message telling you which key to press — this is your window to act.

The key varies by manufacturer. On Dell computers, press F2. On HP and Lenovo, press F10. On Asus and many other brands, press Delete. On Microsoft Surface devices, press F12. If you are unsure of your manufacturer, look at the logo on the boot screen or check your computer's documentation.

If you miss the window, let Windows finish loading and restart again. You have only a few seconds. Some computers show the message for longer if you hold down the key as soon as you see the logo. If you still cannot get in, try holding the key down continuously from the moment you press the power button.

Navigating the BIOS menu to find boot settings

Once you are in BIOS, you will see a menu with several options. The layout differs between manufacturers, but you are looking for a section called Boot, Boot Options, or Boot Order. Use the arrow keys on your keyboard to move between menu items — the mouse does not work in BIOS.

Look at the bottom or side of the screen for instructions on how to navigate. Most BIOS menus show "Use arrow keys to select" or similar text. Press Enter or the right arrow to open a menu section. If you see a list of devices, you are in the right place.

Some newer computers use a graphical BIOS with clickable options, but the principle is the same: find the Boot section and look for a list of devices. If you cannot find it after checking the main menu, look for a tab or section labeled "Advanced" or "Settings".

Moving your USB drive or other device to the top of the boot order

In the Boot Order list, you will see your hard drive, and possibly a USB drive, CD/DVD drive, or network boot option. The device at the top of the list is checked first. To change the order, select the device you want to boot from (your USB drive, for example) using the arrow keys.

Once selected, look for an option to move it up. This is usually done by pressing +, Page Up, or a key shown on screen like F5 or F6. The exact key depends on your BIOS version, but the screen will show you which one to use. Move your device to the top position.

Your hard drive will move down the list automatically. You can also set a one-time boot device in some BIOS versions, which boots from a specific device once without permanently changing the order. This option is often faster if you only need to boot from USB once.

Saving your changes and exiting BIOS

After you have arranged the boot order, you need to save your changes. Look for a Save and Exit option, usually at the bottom of the menu or accessible by pressing F10. Some BIOS versions ask you to confirm the save with a yes or no prompt.

If you press a key to exit without saving, your changes will be lost and the boot order will return to its original state. If you are unsure whether you saved, restart the computer and enter BIOS again to check. The boot order will show your changes if they were saved.

After you exit and save, your computer will restart automatically or show a message asking you to press a key. It will now boot from the device you moved to the top of the list on the next startup.

Changing boot order back to your hard drive

Once you have finished using the USB drive or external device, you will want to boot from your hard drive again. Follow the same steps: restart, enter BIOS, navigate to Boot Order, move your hard drive back to the top, and save.

If you left your USB drive plugged in and it is still at the top of the boot order, your computer will try to boot from it first. If the USB drive is empty or not bootable, the computer will move to the next device in the list and boot from your hard drive. This is why some computers still start normally even if a USB is plugged in.

To avoid confusion, unplug the USB drive after you are done with it, then change the boot order back to your hard drive. This ensures your computer always boots the way you expect.

Troubleshooting boot order problems

If your computer does not boot from the USB drive even though it is at the top of the boot order, the USB drive may not be bootable. A bootable drive has been specially prepared with an operating system or tool. If you created the USB drive yourself, make sure you used the correct method — straightforward copying files to a USB drive does not make it bootable.

If you cannot see your USB drive in the boot order list at all, try plugging it into a different USB port, preferably a port on the back of the computer or a port labeled USB 3.0 or higher. Some BIOS versions do not recognize USB drives plugged into certain ports. Restart and enter BIOS again to see if the drive appears.

If you are locked out of BIOS because you forgot a password, or if your computer will not start at all, you may need to reset the BIOS to factory settings. This usually involves removing the CMOS battery inside the computer for a few minutes, but this is a more advanced step. Contact your computer's manufacturer for guidance if you reach this point.

Frequently Asked Questions

Will changing boot order affect my Windows installation or files?

No. Changing boot order in BIOS only tells your computer which device to look at first when it starts. Your Windows installation and files remain untouched. If you boot from a USB drive and then change the boot order back to your hard drive, Windows will load normally the next time you restart.

Can I set a USB drive to boot permanently without changing it back?

Yes, but it is not recommended for everyday use. If you leave a USB drive at the top of the boot order and it is plugged in, your computer will always try to boot from it first. If the USB is not bootable or is unplugged, the computer will then try the next device. To avoid confusion, change the boot order back to your hard drive after you are done with the USB.

What if I cannot find the boot order option in my BIOS?

Look for a tab or section labeled "Advanced", "Settings", or "System Configuration". Some manufacturers hide boot options in a submenu. If you still cannot find it, restart and enter BIOS again, then look more carefully at all available menu sections. You can also check your computer manufacturer's website for a BIOS manual specific to your model.

Does changing boot order require a password?

Not usually, unless a BIOS password has been set on your computer. If you see a password prompt when you try to enter BIOS, you will need the password to make changes. If you do not know it, contact your computer's manufacturer or the person who set it up.

Will my computer boot from USB automatically if I leave it plugged in?

Only if the USB drive is at the top of the boot order and is bootable. If your hard drive is at the top of the boot order, your computer will boot from the hard drive even if a USB drive is plugged in. The boot order determines which device is checked first, not whether a USB drive is present.