What the BIOS is and why you might need to enter it
The BIOS (Basic Input/Output System) is the software that runs on your computer before Windows, macOS, or Linux loads. It controls hardware settings like boot order, fan speed, and whether certain ports are active. You enter the BIOS to change these settings — for example, to boot from a USB drive, disable a device that's causing problems, or check your hard drive health.
Most people never need to enter the BIOS. But if you're troubleshooting a hardware issue or installing a new operating system, you'll need to know how to get there. The process is different depending on whether you have a Windows PC or a Mac, and even varies between manufacturers.
Key Takeaways
- You enter the BIOS by pressing a specific key (usually Delete, F2, F10, or F12) when ready after you power on your computer, before Windows loads.
- The key you need depends on your computer's manufacturer — Dell, HP, Lenovo, and others each use different keys.
- You have only a few seconds to press the key, so you may need to restart and try again if you miss the window.
- Changes you make in the BIOS take effect when ready and can prevent your computer from starting, so change only what you understand.
- Macs do not have a traditional BIOS; they use firmware settings accessed differently, and most users never need to change them.
How to enter the BIOS on a Windows PC
Power on your computer or restart it if it is already running. when ready after the screen goes black (before any logos appear), begin pressing the BIOS key repeatedly — do not hold it down, tap it several times per second. You have only a few seconds before Windows starts to load.
The key you need depends on your computer's brand. Dell and Lenovo laptops usually use F2. HP and Compaq use F10. Asus uses Delete or F2. Acer uses Delete or F2. MSI motherboards use Delete. If you are not sure of your brand, restart and watch the first screen carefully — many computers display "Press [key] to enter Setup" for a moment. If you miss it, restart and try again.
If you press the wrong key, nothing happens and Windows loads normally. Restart and try the next key on the list. Once you press the correct key, the BIOS screen appears — it usually has a dark background with white or blue text, and looks nothing like Windows.
Navigating the BIOS menu
The BIOS interface uses the keyboard only — your mouse will not work. Use the arrow keys to move between options, Enter to select, and Escape to go back. Some BIOS versions use + and − keys to change values. At the bottom of the screen, you will usually see a legend showing which keys do what.
The most common sections you will encounter are Main (shows your hardware: CPU, RAM, hard drive), Boot (controls which device your computer starts from), Security (password and encryption settings), and Power (fan speed, sleep settings). Do not change anything unless you know what it does. Many settings have names that are not obvious, and changing the wrong one can prevent your computer from starting.
If you get lost, look for an option called Exit or Quit and choose Exit Without Saving. This closes the BIOS without making any changes, and your computer will start normally.
Changing boot order to start from a USB drive
One of the most common reasons to enter the BIOS is to boot from a USB drive — for example, to install Windows or run a repair tool. Find the Boot section in the BIOS menu. You will see a list of devices in order: usually your hard drive is first, and USB drives appear below it.
Select the USB drive and use the + key (or the key shown in the legend) to move it to the top of the list. This tells your computer to check the USB drive first when it starts. Save your changes — usually by pressing F10 or finding a Save and Exit option — and your computer will restart and boot from the USB drive.
After you are done using the USB drive, restart the computer, enter the BIOS again, and move your hard drive back to the top of the boot order. If you leave the USB drive first and it is not plugged in, your computer may fail to start.
Saving changes and exiting the BIOS
When you have made the changes you need, look for a Save and Exit option, usually near the bottom of the menu or accessible by pressing F10. The BIOS will ask you to confirm — select Yes to save your changes and restart the computer.
Your computer will restart and explore the new settings. Some changes (like boot order) take effect when ready. Others (like fan speed) may take a few minutes to explore. If your computer does not start after you make a change, restart it, enter the BIOS again, and undo the change by selecting Load Defaults or Reset to Factory Settings.
BIOS on Mac computers
Apple computers do not have a BIOS in the traditional sense. Older Macs (before 2006) used Open Firmware, and newer Macs use EFI or Apple Silicon firmware. Most Mac users never need to change firmware settings — the operating system handles hardware configuration automatically.
If you do need to change Mac firmware settings, restart your computer and hold Command + Option + R to enter Recovery Mode, then look for a Startup Security Utility or Firmware Security Settings option in the Utilities menu. The process varies significantly by Mac model and age, so check Apple's support site for your specific computer before attempting changes.
When not to change BIOS settings
Do not enter the BIOS unless you have a specific reason — a troubleshooting step you found in documentation, or a hardware change you are making. Changing settings at random can disable devices your computer needs to function, lock you out with a password you forget, or prevent Windows from starting.
If you are not sure what a setting does, leave it alone. If you made a change and your computer will not start, restart it, enter the BIOS, and look for an option called Load Defaults, Reset to Factory Defaults, or Restore Factory Settings. This resets all BIOS options to their original state and usually fixes startup problems caused by accidental changes.
Frequently Asked Questions
What if I press the BIOS key and nothing happens?
You either pressed the wrong key or missed the window — the BIOS key must be pressed within a few seconds of power-on, before any logos appear. Restart your computer and try again, watching the first screen carefully for a message like "Press F2 to enter Setup". If you still see nothing, try the next key on the manufacturer list for your brand.
Can I set a password in the BIOS to protect my computer?
Yes, most BIOS versions have a Security section where you can set a password. However, if you forget the password, you may not be able to start your computer or change settings. Only set a BIOS password if you understand the consequences and have a way to recover if you forget it — usually by contacting the manufacturer or a technician.
Will changing BIOS settings make my computer faster?
Not usually. Some settings like fan speed or power management can affect performance slightly, but BIOS changes rarely make a noticeable difference in everyday speed. If your computer is slow, the problem is almost always software (too many programs running, malware, or a full hard drive), not BIOS settings.
Is it safe to change BIOS settings if I do not know what they do?
No. Changing settings you do not understand can disable hardware your computer needs, prevent it from starting, or cause data loss. Only change settings if you have clear instructions from a troubleshooting guide or manufacturer documentation that explains what each change does.
What does "Load Defaults" do in the BIOS?
It resets all BIOS settings to the manufacturer's original configuration. This is useful if you made a change that broke something — restarting with defaults usually fixes startup problems. You will lose any custom settings you made (like boot order), so use this only when necessary.