What BIOS is and why you might need to enter it

BIOS (Basic Input/Output System) is the firmware that runs before your operating system starts up. It controls hardware settings like boot order, fan speed, and security features. Most people never need to enter BIOS, but you may need to access it to change which drive your computer boots from, enable or disable hardware, adjust power settings, or troubleshoot startup problems.

The process differs slightly depending on whether you have a Windows PC, Mac, or older computer, and the exact key you press depends on your manufacturer. This guide covers the most common scenarios and what to do if the standard method doesn't work for you.

Key Takeaways

  • You enter BIOS by pressing a specific key during startup — usually Delete, F2, F10, or F12 — before Windows or macOS loads.
  • The correct key varies by manufacturer: Dell often uses F2, HP and Lenovo use F10 or F2, ASUS uses Delete, and Acer uses Delete or F2.
  • You must press the key repeatedly as soon as you power on the computer, not after it has already started loading the operating system.
  • If you miss the window or the key doesn't work, restart the computer and try again — there is no penalty for failed attempts.
  • On newer Macs with Apple Silicon chips, BIOS access works differently and requires holding the power button during startup instead.

Finding the correct key for your computer

The key you need to press is usually displayed on the startup screen for a fraction of a second. Look for text that says "Press [key] to enter Setup" or "Press [key] for BIOS." If you cannot read it in time, you can look up your computer's manual or check the manufacturer's website by searching "[Your Brand] BIOS key" — for example, "Dell BIOS key" or "HP BIOS key."

Common BIOS keys by manufacturer are: Dell (F2), HP (F10 or Esc then F10), Lenovo (F2 or F10), ASUS (Delete), Acer (Delete or F2), MSI (Delete), and Gigabyte (Delete). If your computer is a custom-built desktop, the key depends on the motherboard manufacturer, which is often printed on the motherboard itself or listed in the documentation that came with it.

If you built your computer or inherited it without documentation, try Delete or F2 first — these are the most common defaults. If neither works, restart and try F10, F12, or Esc. You will not damage anything by trying different keys.

Entering BIOS on a Windows PC

Shut down your computer completely. Press the power button to turn it on. when ready begin pressing your BIOS key repeatedly — do not wait for anything to load. Press it once per second until the BIOS screen appears. This usually happens within 5 to 10 seconds of startup.

If you see the Windows logo or the login screen, you waited too long. Shut down the computer again and try once more, pressing the key faster. Some computers require you to press the key many times in quick succession rather than holding it down, so try both approaches if one does not work.

Once you are in BIOS, you will see a menu with options like "Main," "Advanced," "Boot," and "Security." Use the arrow keys to navigate and Enter to select. The exact layout varies by manufacturer, but the controls are always keyboard-based. Do not change settings unless you know what they do — BIOS changes can prevent your computer from starting if set incorrectly.

Entering BIOS on a Mac

On older Macs with Intel processors, shut down the computer completely. Turn it on and when ready hold Command + R until you see the Apple logo or a spinning globe. This enters Recovery Mode, not BIOS directly. From Recovery Mode, you can access some firmware settings through Utilities menu, though full BIOS access is more limited on Macs than on Windows PCs.

On newer Macs with Apple Silicon chips (M1, M2, M3, and later), shut down the computer. Press and hold the power button until you see "Loading startup options." Release the button. You will see a screen with your available drives. Click the gear icon labeled "Options" to access System Settings and firmware controls. The process is simpler than older Macs but offers fewer low-level settings.

Most Mac users do not need to access firmware settings for routine maintenance. If you are trying to change boot order or troubleshoot hardware, contact Apple Support first — many settings that require BIOS access on Windows are handled differently on macOS.

What to do if you cannot access BIOS

If the standard key for your manufacturer does not work, restart and try the other common keys in order: Delete, F2, F10, F12, Esc. Press each one repeatedly as soon as the computer powers on. If none of these work, your computer may have BIOS access locked by a password or disabled by the manufacturer.

Check your computer's manual or the manufacturer's support website for your specific model number. Search for "[Model number] BIOS access" or "[Model number] enter setup." Many manufacturers publish step-by-step guides for their most common models. If your computer is a laptop from a major brand, the manual is usually available as a PDF read on their support site.

If BIOS is password-protected and you do not know the password, you may need to contact the manufacturer or a technician. Some manufacturers can reset BIOS passwords with proof of ownership, but the process varies. Do not attempt to open the computer yourself unless you are experienced with hardware — you risk damaging components or voiding your warranty.

Common BIOS changes and what they do

Once you are in BIOS, you may see options to change boot order (which drive starts first), enable or disable USB ports or other hardware, adjust fan speed, or modify power settings. The most common reason to enter BIOS is to change boot order — for example, to boot from a USB drive to install Windows or run a repair tool.

Look for a section labeled "Boot" or "Boot Order." Use arrow keys to move a drive up or down in the list, making your preferred drive first. Save your changes before exiting — BIOS will prompt you to confirm. After you save, the computer will restart and use the new boot order.

If you are not sure what a setting does, do not change it. Incorrect BIOS settings can prevent your computer from starting. If you accidentally change something and the computer will not start, restart and enter BIOS again to undo the change, or contact a technician.

Frequently Asked Questions

What happens if I press the wrong key during startup?

Nothing happens — the computer continues to start normally. You can try again by restarting the computer and pressing the correct key. There is no penalty or damage from pressing the wrong key.

Can I access BIOS after Windows has already started?

Not on most computers. You must press the key during the startup process, before the operating system loads. If you miss the window, shut down the computer completely and try again. Some newer Windows PCs offer a BIOS restart option in Settings, but this is not available on all models.

Is it safe to change BIOS settings?

Changing some settings is safe — like boot order or enabling a USB port. Other settings, like CPU voltage or memory timing, can damage your computer if set incorrectly. Only change settings you understand. If you are unsure, leave it alone or contact a technician.

Why does my BIOS key not work on my laptop?

Some laptop manufacturers disable BIOS access or require a different key combination, like Fn + F2 instead of just F2. Check your laptop's manual for the exact key. If BIOS is password-protected, you may need to contact the manufacturer to reset it.

Do I need to change anything in BIOS for normal computer use?

No. BIOS is set up correctly from the factory for most users. You only need to enter BIOS if you are troubleshooting a specific problem, installing a new operating system, or changing hardware settings on purpose.