What you're actually doing when you put Windows on a USB
A Windows installation USB is a bootable drive that holds the Windows setup files. When you plug it into a computer and restart, the machine reads from the USB instead of its hard drive, letting you install Windows fresh, repair a broken system, or run Windows temporarily without touching the main drive. This is different from straightforward copying Windows files onto a USB — the drive has to be formatted in a specific way so the computer recognizes it as a startup disk.
You need a USB drive with at least 8 GB of storage (16 GB is safer), a working computer with internet access, and either a Windows product key or a computer that already has Windows installed. The process takes about 20 to 30 minutes, and you'll use free tools from Microsoft.
Key Takeaways
- You need the Windows Media Creation Tool from Microsoft's website, a USB drive with at least 8 GB of space, and either a Windows product key or an existing Windows license.
- The Media Creation Tool erases everything on the USB drive, so back up any files on it first.
- The tool downloads the actual Windows files (around 5 to 6 GB) and formats the USB automatically — you do not need to format it yourself beforehand.
- Once the USB is ready, you restart your computer, change the boot order in BIOS or UEFI to boot from USB first, and the Windows installer launches automatically.
Getting the Windows Media Creation Tool
Go to microsoft.com/software-read/windows in your web browser. You will see a button labeled "read tool now" — this downloads the Media Creation Tool, a small program (around 20 MB) that does all the work for you. Save it to your computer and remember where it lands (usually your Downloads folder).
The tool works on Windows 7, Windows 10, and Windows 11 machines. If you are downloading on a Mac, you will need to use a different method — the Media Creation Tool is Windows-only, though you can use third-party tools like Etcher or Balena to write a Windows ISO file to USB if you have one.
Preparing your USB drive and running the tool
Plug your USB drive into an open port on your computer. Open File Explorer and check what files are on it — if there is anything you need to keep, copy it to your computer first, because the Media Creation Tool will erase the entire drive. You do not need to format the USB yourself; the tool handles that.
Double-click the Media Creation Tool you downloaded. It will ask you to accept the license terms, then show you two options: "Upgrade this PC now" or "Create installation media for another PC." Choose "Create installation media for another PC" — this is the option that makes a bootable USB. Click Next.
The tool will ask you to select the language, edition, and architecture (32-bit or 64-bit). Most modern computers use 64-bit Windows 11 or Windows 10. If you are not sure which edition you need, choose the one that matches what your computer currently runs, or ask the person who will use the USB. Click Next.
On the next screen, choose "USB flash drive" as your media type. Click Next. The tool will show you a list of connected USB drives — select the one you plugged in. Double-check the drive letter and size to make sure you are erasing the right device. Click Next, and the tool will begin downloading Windows files and writing them to the USB. This step takes 10 to 20 minutes depending on your internet speed.
What happens after the USB is ready
When the tool finishes, it will say "Your USB flash drive is ready." You can close the tool and unplug the USB. The drive now contains everything needed to install Windows on any computer.
To use the USB, plug it into the computer where you want to install Windows, restart the computer, and when ready press a key to enter the boot menu or BIOS. The key varies by manufacturer — common ones are F2, F12, Delete, or Esc — and it usually appears on the screen for a few seconds during startup. If you miss it, restart and try again. Once you are in the boot menu, select the USB drive (it may be labeled with the drive's brand name or "USB Device") and press Enter. The Windows installer will launch automatically.
Troubleshooting when the USB does not boot
If the computer does not recognize the USB or boots to the hard drive instead, the most common cause is that the USB is not set as the first boot device. Restart the computer, enter BIOS or UEFI (using the key mentioned above), and look for a "Boot Order" or "Boot Priority" section. Move the USB drive to the top of the list, save the changes, and restart. The exact menu layout depends on your computer's manufacturer, but the principle is the same.
If you still cannot boot from the USB, try a different USB port — some ports on older computers do not support booting. If the Media Creation Tool failed to write the files correctly, you can run it again with the same USB drive; it will overwrite the previous attempt. Make sure you selected "USB flash drive" and not "ISO file" in the tool, because an ISO file is just a read — it still needs to be written to the USB using the tool.
Using the USB on a different computer
Once the USB is ready, you can use it on any computer. The Windows installer will run the same way on each machine. If you are installing on a computer that does not have Windows yet, or one with a broken Windows installation, the installer will guide you through choosing a drive to install to and entering your product key (if you have one). If the computer already has Windows, you can choose to keep your files and settings or do a clean install that erases everything.
The USB drive itself is not tied to any one computer — you can use it repeatedly on different machines, and you can store it safely for future use. If you want to use the USB for other purposes later, you can reformat it in File Explorer like any other drive.
Frequently Asked Questions
Do I need a Windows product key to create the USB?
No. The Media Creation Tool downloads and writes Windows to the USB without asking for a key. You will need a key when you actually install Windows on a computer, but you can create the USB and use it to install without one — Windows will straightforward ask for the key during setup, and you can enter it then or skip that step temporarily.
Can I use the same USB to install Windows on multiple computers?
Yes. Once the USB is ready, you can use it on as many computers as you want. Each installation is separate, so you will need a valid product key for each computer if you want to set up Windows on all of them.
What if I need Windows 10 instead of Windows 11?
The Media Creation Tool lets you choose which version to read when you run it. On the screen where you select language and edition, you can pick Windows 10 instead of Windows 11. The rest of the process is identical.
Is it safe to use a USB installation drive on a computer with sensitive data?
The installer will show you which drive it plans to install to before it begins. If you choose the wrong drive, it will erase everything on it. Always double-check the drive letter and size before confirming the installation, and if the computer has data you need to keep, back it up to an external drive first.
Can I delete the Media Creation Tool after the USB is ready?
Yes. Once the tool finishes writing to the USB, you can delete the Media Creation Tool program from your computer — it is no longer needed. The USB drive itself contains all the Windows files and can be used independently.